Product Specifications: Screen
Diagonal Size 13.3 inch
Resolution 1024x768 (XGA)
Touchscreen LCD Pressure-Sensitive Touchscreen (finger and stylus)
Product Specifications: Processor
Speed 1.4GHz
Model Intel Pentium M Low Voltage 738 (Centrino)
Chipset Intel 915GMS
Lan:
Gigabit Enthernet 10/100/1000 MBit/s
Product Specifications: Wireless Connectivity
Wireless LAN 802.11abg , Intel Pro Wireless 2915ABG - 54 MBit/s
WWAN GSM 850/1800/1900MHz Power: 2W 850, 1W1800, 1W 1900MHz
GPS Receiver None ( can be added with a after marked DIY kit )
GPRS Multislot class 10
EDGE Multislot class 10
RF Antenna Pass-through Yes
Bluetooth No
Product Specifications: Keyboard
Keyboard Type Mechanical keyboard
graphic prosessor:
Intel 915GMS
sound:
SigmaTel STAC9751T
To summarize what has been discovered is that the CF-29 has an uncommon multiplexed PS2 type of connection that the touchscreen/touchpad uses.
There is no simple solution, as far that i know - you have to be a bit of a Linux expert as well as a programmer and know how to write a patch for the CF-29 hardware and then patch your kernel and configure X Windows to get it working .
It can be done though - Emperor Linux is one distribution that has it working but they will only pre-install it on a CF-29 for you which is quite costly. There is also another company that has a CF-29 touchscreen driver for sale for $149.00.
So do anyone know if automatic configuration and setup has been added for this device ?
What about the hotkeys ?
Diagonal Size 13.3 inch
Resolution 1024x768 (XGA)
Touchscreen LCD Pressure-Sensitive Touchscreen (finger and stylus)
Product Specifications: Processor
Speed 1.4GHz
Model Intel Pentium M Low Voltage 738 (Centrino)
Chipset Intel 915GMS
Lan:
Gigabit Enthernet 10/100/1000 MBit/s
Product Specifications: Wireless Connectivity
Wireless LAN 802.11abg , Intel Pro Wireless 2915ABG - 54 MBit/s
WWAN GSM 850/1800/1900MHz Power: 2W 850, 1W1800, 1W 1900MHz
GPS Receiver None ( can be added with a after marked DIY kit )
GPRS Multislot class 10
EDGE Multislot class 10
RF Antenna Pass-through Yes
Bluetooth No
Product Specifications: Keyboard
Keyboard Type Mechanical keyboard
graphic prosessor:
Intel 915GMS
sound:
SigmaTel STAC9751T
To summarize what has been discovered is that the CF-29 has an uncommon multiplexed PS2 type of connection that the touchscreen/touchpad uses.
There is no simple solution, as far that i know - you have to be a bit of a Linux expert as well as a programmer and know how to write a patch for the CF-29 hardware and then patch your kernel and configure X Windows to get it working .
It can be done though - Emperor Linux is one distribution that has it working but they will only pre-install it on a CF-29 for you which is quite costly. There is also another company that has a CF-29 touchscreen driver for sale for $149.00.
So do anyone know if automatic configuration and setup has been added for this device ?
What about the hotkeys ?
Comment