the latest kubuntu kernel update fixes this issue
Laptop is a DELL Studio XPS 16 running Kubuntu Lucid Beta cant write CD/DVDs any thoughts on a fix would be appreciated
Devices
-----------------------
HL-DT-ST DVD+-RW GA11N A102 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.1 (KDE 4.4.1)
QT Version: 4.6.2
Kernel: 2.6.32-16-generic-pae
Used versions
-----------------------
cdrecord: 1.1.10
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD+-RW GA11N '
Revision : 'A102'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 16415 kB/s 93x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 5540 KB/s
Track 01: data 1312 MB
Total size: 1507 MB (149:21.09) = 672082 sectors
Lout start: 1507 MB (149:23/07) = 672082 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1626414
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 1312 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0C 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 56.049s
Average write speed 19.7x.
Fixating...
Fixating time: 0.012s
/usr/bin/wodim: fifo had 192 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=672082s -
I also noticed this in dmesg
[ 660.443062] Info fld=0x0
[ 660.443065] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.443075] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.443092] end_request: I/O error, dev sr0, sector 0
[ 660.445777] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 660.445783] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 660.445789] Info fld=0x0
[ 660.445791] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.445798] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.445810] end_request: I/O error, dev sr0, sector 0
[ 660.448616] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 660.448623] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 660.448630] Info fld=0x0
[ 660.448632] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.448639] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.448652] end_request: I/O error, dev sr0, sector 0
[ 660.451368] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 660.451376] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 660.451385] Info fld=0x0
[ 660.451388] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.451397] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.451415] end_request: I/O error, dev sr0, sector 0
[ 660.628587] cdrom: This disc doesn't have any tracks I recognize!
Laptop is a DELL Studio XPS 16 running Kubuntu Lucid Beta cant write CD/DVDs any thoughts on a fix would be appreciated
Devices
-----------------------
HL-DT-ST DVD+-RW GA11N A102 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.1 (KDE 4.4.1)
QT Version: 4.6.2
Kernel: 2.6.32-16-generic-pae
Used versions
-----------------------
cdrecord: 1.1.10
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD+-RW GA11N '
Revision : 'A102'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 16415 kB/s 93x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 5540 KB/s
Track 01: data 1312 MB
Total size: 1507 MB (149:21.09) = 672082 sectors
Lout start: 1507 MB (149:23/07) = 672082 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1626414
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 1312 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0C 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 56.049s
Average write speed 19.7x.
Fixating...
Fixating time: 0.012s
/usr/bin/wodim: fifo had 192 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=672082s -
I also noticed this in dmesg
[ 660.443062] Info fld=0x0
[ 660.443065] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.443075] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.443092] end_request: I/O error, dev sr0, sector 0
[ 660.445777] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 660.445783] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 660.445789] Info fld=0x0
[ 660.445791] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.445798] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.445810] end_request: I/O error, dev sr0, sector 0
[ 660.448616] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 660.448623] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 660.448630] Info fld=0x0
[ 660.448632] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.448639] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.448652] end_request: I/O error, dev sr0, sector 0
[ 660.451368] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 660.451376] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 660.451385] Info fld=0x0
[ 660.451388] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 660.451397] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 660.451415] end_request: I/O error, dev sr0, sector 0
[ 660.628587] cdrom: This disc doesn't have any tracks I recognize!