[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5b90] f5b90 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ dfeda000-dfee0000 [ 0.000000] RAMDISK: 35b6e000 - 36daf000 [ 0.000000] ACPI: RSDP 00000000000f7b80 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000dfee30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000dfeec540 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000dfee3240 092AD (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: SSDT 00000000dfeec740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000dfeec9c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000dfeeca40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000dfeec680 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800dfc00000 s84416 r8192 d22080 u1048576 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=e05c062c-5e79-474b-afcf-7ab3e3defb79 ro acpi_enforce_resources=lax splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ d4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000 [ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000 [ 0.000000] Memory: 3969360k/4718592k available (5940k kernel code, 525892k absent, 223340k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2210.178 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.35 BogoMIPS (lpj=22101780) [ 0.010010] pid_max: default: 32768 minimum: 301 [ 0.010037] Security Framework initialized [ 0.010053] AppArmor: AppArmor initialized [ 0.010055] Yama: becoming mindful. [ 0.010526] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013161] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.014213] Mount-cache hash table entries: 256 [ 0.014359] Initializing cgroup subsys ns [ 0.014363] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.014366] Initializing cgroup subsys cpuacct [ 0.014371] Initializing cgroup subsys memory [ 0.014381] Initializing cgroup subsys devices [ 0.014383] Initializing cgroup subsys freezer [ 0.014385] Initializing cgroup subsys net_cls [ 0.014388] Initializing cgroup subsys blkio [ 0.014421] tseg: 00dff00000 [ 0.014423] CPU: Physical Processor ID: 0 [ 0.014425] CPU: Processor Core ID: 0 [ 0.014427] mce: CPU supports 5 MCE banks [ 0.014438] using C1E aware idle routine [ 0.016000] ACPI: Core revision 20110112 [ 0.025254] ftrace: allocating 24314 entries in 96 pages [ 0.030090] Setting APIC routing to flat [ 0.030526] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.132662] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.140000] Performance Events: AMD PMU driver. [ 0.140000] ... version: 0 [ 0.140000] ... bit width: 48 [ 0.140000] ... generic registers: 4 [ 0.140000] ... value mask: 0000ffffffffffff [ 0.140000] ... max period: 00007fffffffffff [ 0.140000] ... fixed-purpose events: 0 [ 0.140000] ... event mask: 000000000000000f [ 0.140000] Booting Node 0, Processors #1 Ok. [ 0.290049] Brought up 2 CPUs [ 0.290051] Total of 2 processors activated (8840.76 BogoMIPS). [ 0.290277] devtmpfs: initialized [ 0.291024] print_constraints: dummy: [ 0.291054] Time: 18:51:31 Date: 05/14/11 [ 0.291097] NET: Registered protocol family 16 [ 0.291136] Trying to unpack rootfs image as initramfs... [ 0.291229] node 0 link 0: io port [7000, ffff] [ 0.291233] TOM: 00000000e0000000 aka 3584M [ 0.291235] node 0 link 0: mmio [a0000, bffff] [ 0.291238] node 0 link 0: mmio [e0000000, efffffff] [ 0.291241] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.291244] node 0 link 0: mmio [f0000000, f07fffff] [ 0.291246] TOM2: 0000000120000000 aka 4608M [ 0.291249] bus: [00, 07] on node 0 link 0 [ 0.291252] bus: 00 index 0 [io 0x0000-0xffff] [ 0.291254] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.291256] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff] [ 0.291258] bus: 00 index 3 [mem 0xf4000000-0xffffffff] [ 0.291260] bus: 00 index 4 [mem 0x120000000-0xfcffffffff] [ 0.291270] ACPI: bus type pci registered [ 0.291347] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.291351] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.297560] PCI: Using configuration type 1 for base access [ 0.298449] bio: create slab at 0 [ 0.300683] ACPI: EC: Look up EC in DSDT [ 0.307454] ACPI: Interpreter enabled [ 0.307459] ACPI: (supports S0 S1 S3 S4 S5) [ 0.307482] ACPI: Using IOAPIC for interrupt routing [ 0.314955] ACPI: No dock devices found. [ 0.314959] HEST: Table not found. [ 0.314963] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.315569] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) [ 0.316749] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.316752] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored) [ 0.316755] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored) [ 0.316757] pci_root PNP0A08:00: host bridge window [io 0x7000-0xffff] (ignored) [ 0.316760] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored) [ 0.316763] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.316766] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xefffffff] (ignored) [ 0.316768] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored) [ 0.316771] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored) [ 0.316796] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500 [ 0.316952] pci 0000:00:01.0: [10de:0360] type 0 class 0x000601 [ 0.316987] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05 [ 0.316999] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.317015] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.317020] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] [ 0.317041] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.317047] pci 0000:00:01.1: PME# disabled [ 0.317059] pci 0000:00:01.2: [10de:036a] type 0 class 0x000500 [ 0.317100] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03 [ 0.317108] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.317134] pci 0000:00:02.0: supports D1 D2 [ 0.317136] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317139] pci 0000:00:02.0: PME# disabled [ 0.317151] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03 [ 0.317159] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.317184] pci 0000:00:02.1: supports D1 D2 [ 0.317186] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317189] pci 0000:00:02.1: PME# disabled [ 0.317208] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101 [ 0.317224] pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f] [ 0.317246] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101 [ 0.317255] pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7] [ 0.317259] pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.317264] pci 0000:00:05.0: reg 18: [io 0x0970-0x0977] [ 0.317269] pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73] [ 0.317274] pci 0000:00:05.0: reg 20: [io 0xdc00-0xdc0f] [ 0.317278] pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff] [ 0.317302] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101 [ 0.317310] pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7] [ 0.317315] pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3] [ 0.317319] pci 0000:00:05.1: reg 18: [io 0x0960-0x0967] [ 0.317324] pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63] [ 0.317329] pci 0000:00:05.1: reg 20: [io 0xc800-0xc80f] [ 0.317333] pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.317357] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101 [ 0.317365] pci 0000:00:05.2: reg 10: [io 0xc400-0xc407] [ 0.317370] pci 0000:00:05.2: reg 14: [io 0xc000-0xc003] [ 0.317374] pci 0000:00:05.2: reg 18: [io 0xbc00-0xbc07] [ 0.317379] pci 0000:00:05.2: reg 1c: [io 0xb800-0xb803] [ 0.317384] pci 0000:00:05.2: reg 20: [io 0xb400-0xb40f] [ 0.317388] pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff] [ 0.317414] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604 [ 0.317441] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403 [ 0.317451] pci 0000:00:06.1: reg 10: [mem 0xfe020000-0xfe023fff] [ 0.317480] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.317483] pci 0000:00:06.1: PME# disabled [ 0.317503] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680 [ 0.317515] pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.317520] pci 0000:00:08.0: reg 14: [io 0xb000-0xb007] [ 0.317525] pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff] [ 0.317530] pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f] [ 0.317553] pci 0000:00:08.0: supports D1 D2 [ 0.317555] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317559] pci 0000:00:08.0: PME# disabled [ 0.317575] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680 [ 0.317587] pci 0000:00:09.0: reg 10: [mem 0xfe027000-0xfe027fff] [ 0.317592] pci 0000:00:09.0: reg 14: [io 0xac00-0xac07] [ 0.317597] pci 0000:00:09.0: reg 18: [mem 0xfe026000-0xfe0260ff] [ 0.317602] pci 0000:00:09.0: reg 1c: [mem 0xfe025000-0xfe02500f] [ 0.317624] pci 0000:00:09.0: supports D1 D2 [ 0.317626] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317631] pci 0000:00:09.0: PME# disabled [ 0.317649] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604 [ 0.317670] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317673] pci 0000:00:0a.0: PME# disabled [ 0.317687] pci 0000:00:0b.0: [10de:0374] type 1 class 0x000604 [ 0.317706] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317709] pci 0000:00:0b.0: PME# disabled [ 0.317723] pci 0000:00:0c.0: [10de:0374] type 1 class 0x000604 [ 0.317743] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317746] pci 0000:00:0c.0: PME# disabled [ 0.317759] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604 [ 0.317779] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317782] pci 0000:00:0d.0: PME# disabled [ 0.317796] pci 0000:00:0e.0: [10de:0375] type 1 class 0x000604 [ 0.317815] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317818] pci 0000:00:0e.0: PME# disabled [ 0.317832] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604 [ 0.317852] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317854] pci 0000:00:0f.0: PME# disabled [ 0.317872] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.317890] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.317908] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.317924] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.317946] PCI: peer root bus 00 res updated from pci conf [ 0.317976] pci 0000:01:07.0: [14f1:8800] type 0 class 0x000400 [ 0.317987] pci 0000:01:07.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.318035] pci 0000:01:07.1: [14f1:8801] type 0 class 0x000480 [ 0.318045] pci 0000:01:07.1: reg 10: [mem 0xf9000000-0xf9ffffff] [ 0.318090] pci 0000:01:07.2: [14f1:8802] type 0 class 0x000480 [ 0.318100] pci 0000:01:07.2: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.318151] pci 0000:01:0b.0: [104c:8023] type 0 class 0x000c00 [ 0.318162] pci 0000:01:0b.0: reg 10: [mem 0xfcfff000-0xfcfff7ff] [ 0.318169] pci 0000:01:0b.0: reg 14: [mem 0xfcff8000-0xfcffbfff] [ 0.318204] pci 0000:01:0b.0: supports D1 D2 [ 0.318206] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.318210] pci 0000:01:0b.0: PME# disabled [ 0.318230] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.318234] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.318237] pci 0000:00:06.0: bridge window [mem 0xf9000000-0xfcffffff] [ 0.318240] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.318243] pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.318246] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.318249] pci 0000:00:06.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode) [ 0.318252] pci 0000:00:06.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode) [ 0.318255] pci 0000:00:06.0: bridge window [mem 0x120000000-0xfcffffffff] (subtractive decode) [ 0.318280] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.318283] pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.318287] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.318290] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.318311] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.318314] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.318317] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.318321] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.318341] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.318345] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.318348] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.318352] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.318372] pci 0000:00:0d.0: PCI bridge to [bus 05-05] [ 0.318375] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.318379] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.318382] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.318415] pci 0000:06:00.0: [197b:2363] type 0 class 0x000101 [ 0.318475] pci 0000:06:00.0: reg 24: [mem 0xfdefe000-0xfdefffff] [ 0.318485] pci 0000:06:00.0: reg 30: [mem 0xfdee0000-0xfdeeffff pref] [ 0.318507] pci 0000:06:00.0: PME# supported from D3hot [ 0.318511] pci 0000:06:00.0: PME# disabled [ 0.318534] pci 0000:06:00.1: [197b:2363] type 0 class 0x000101 [ 0.318551] pci 0000:06:00.1: reg 10: [io 0x9c00-0x9c07] [ 0.318562] pci 0000:06:00.1: reg 14: [io 0x9800-0x9803] [ 0.318572] pci 0000:06:00.1: reg 18: [io 0x9400-0x9407] [ 0.318581] pci 0000:06:00.1: reg 1c: [io 0x9000-0x9003] [ 0.318592] pci 0000:06:00.1: reg 20: [io 0x8c00-0x8c0f] [ 0.318639] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.318650] pci 0000:00:0e.0: PCI bridge to [bus 06-06] [ 0.318654] pci 0000:00:0e.0: bridge window [io 0x8000-0x9fff] [ 0.318657] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.318660] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.318692] pci 0000:07:00.0: [10de:0641] type 0 class 0x000300 [ 0.318700] pci 0000:07:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.318710] pci 0000:07:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.318719] pci 0000:07:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.318725] pci 0000:07:00.0: reg 24: [io 0x7c00-0x7c7f] [ 0.318732] pci 0000:07:00.0: reg 30: [mem 0xf7f80000-0xf7ffffff pref] [ 0.330011] pci 0000:00:0f.0: PCI bridge to [bus 07-07] [ 0.330015] pci 0000:00:0f.0: bridge window [io 0x7000-0x7fff] [ 0.330018] pci 0000:00:0f.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.330022] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.330035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.330244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.330447] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.363930] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.363986] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) [ 0.364036] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364086] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364137] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364189] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.364240] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.364289] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364340] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364392] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.364443] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.364494] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) [ 0.364545] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.364595] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364647] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.364698] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.364749] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.364801] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.364853] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.364904] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.364997] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.365085] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.365175] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.365267] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.365353] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.365439] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.365525] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.365610] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.365697] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.365784] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.365871] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.365958] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.366046] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.366133] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.366221] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.366308] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.366396] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.366484] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.366571] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.366658] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.366807] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.366810] vgaarb: loaded [ 0.367013] SCSI subsystem initialized [ 0.367094] libata version 3.00 loaded. [ 0.367150] usbcore: registered new interface driver usbfs [ 0.367163] usbcore: registered new interface driver hub [ 0.367190] usbcore: registered new device driver usb [ 0.367327] wmi: Mapper loaded [ 0.367329] PCI: Using ACPI for IRQ routing [ 0.367333] PCI: pci_cache_line_size set to 64 bytes [ 0.367431] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.367434] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 0.367545] NetLabel: Initializing [ 0.367547] NetLabel: domain hash size = 128 [ 0.367549] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.367562] NetLabel: unlabeled traffic allowed by default [ 0.367606] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.367613] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.367618] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.370182] Switching to clocksource hpet [ 0.378581] AppArmor: AppArmor Filesystem Enabled [ 0.378618] pnp: PnP ACPI init [ 0.378640] ACPI: bus type pnp registered [ 0.379315] pnp 00:00: [bus 00-07] [ 0.379318] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.379320] pnp 00:00: [io 0x0000-0x03af window] [ 0.379323] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 0.379325] pnp 00:00: [io 0x1c00-0x1c7f window] [ 0.379331] pnp 00:00: [io 0x7000-0xffff window] [ 0.379333] pnp 00:00: [io 0x03b0-0x03df window] [ 0.379336] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.379339] pnp 00:00: [mem 0xe0000000-0xefffffff window] [ 0.379341] pnp 00:00: [mem 0xf4000000-0xfe02ffff window] [ 0.379343] pnp 00:00: [mem 0xfec80000-0xfecbffff window] [ 0.379439] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.379464] pnp 00:01: [io 0x1000-0x107f] [ 0.379466] pnp 00:01: [io 0x1080-0x10ff] [ 0.379468] pnp 00:01: [io 0x1400-0x147f] [ 0.379470] pnp 00:01: [io 0x1480-0x14ff] [ 0.379472] pnp 00:01: [io 0x1800-0x187f] [ 0.379474] pnp 00:01: [io 0x1880-0x18ff] [ 0.379551] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.379555] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.379558] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.379561] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.379564] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.379567] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.379570] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.379673] pnp 00:02: [io 0x0010-0x001f] [ 0.379675] pnp 00:02: [io 0x0022-0x003f] [ 0.379677] pnp 00:02: [io 0x0044-0x005f] [ 0.379679] pnp 00:02: [io 0x0062-0x0063] [ 0.379681] pnp 00:02: [io 0x0065-0x006f] [ 0.379683] pnp 00:02: [io 0x0074-0x007f] [ 0.379685] pnp 00:02: [io 0x0091-0x0093] [ 0.379687] pnp 00:02: [io 0x00a2-0x00bf] [ 0.379689] pnp 00:02: [io 0x00e0-0x00ef] [ 0.379691] pnp 00:02: [io 0x04d0-0x04d1] [ 0.379694] pnp 00:02: [io 0x0800-0x087f] [ 0.379696] pnp 00:02: [io 0x0290-0x0297] [ 0.379770] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.379773] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.379773] Switched to NOHz mode on CPU #0 [ 0.379773] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.379773] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.379497] Switched to NOHz mode on CPU #1 [ 0.379773] pnp 00:03: [dma 4] [ 0.379773] pnp 00:03: [io 0x0000-0x000f] [ 0.379773] pnp 00:03: [io 0x0080-0x0090] [ 0.379773] pnp 00:03: [io 0x0094-0x009f] [ 0.379773] pnp 00:03: [io 0x00c0-0x00df] [ 0.379773] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.379773] pnp 00:04: [irq 0 disabled] [ 0.379773] pnp 00:04: [irq 8] [ 0.379773] pnp 00:04: [mem 0xfefff000-0xfefff3ff] [ 0.379773] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.379773] pnp 00:05: [io 0x0070-0x0073] [ 0.379773] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.379773] pnp 00:06: [io 0x0061] [ 0.379777] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.379786] pnp 00:07: [io 0x00f0-0x00ff] [ 0.379794] pnp 00:07: [irq 13] [ 0.379839] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.380152] pnp 00:08: [io 0x03f8-0x03ff] [ 0.380160] pnp 00:08: [irq 4] [ 0.380230] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.380558] pnp 00:09: [io 0x0378-0x037f] [ 0.380566] pnp 00:09: [irq 7] [ 0.380626] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.381403] pnp 00:0a: [mem 0xf0000000-0xf3ffffff] [ 0.381490] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.381494] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.381631] pnp 00:0b: [mem 0x000d2800-0x000d3fff] [ 0.381634] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.381636] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.381638] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.381641] pnp 00:0b: [mem 0xfefff000-0xfefff0ff] [ 0.381643] pnp 00:0b: [mem 0xdfee0000-0xdfefffff] [ 0.381645] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.381647] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.381650] pnp 00:0b: [mem 0x00100000-0xdfedffff] [ 0.381652] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.381654] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.381657] pnp 00:0b: [mem 0xfefff000-0xfeffffff] [ 0.381659] pnp 00:0b: [mem 0xfff80000-0xfff80fff] [ 0.381661] pnp 00:0b: [mem 0xfff90000-0xfffbffff] [ 0.381663] pnp 00:0b: [mem 0xfffed000-0xfffeffff] [ 0.381762] system 00:0b: [mem 0x000d2800-0x000d3fff] has been reserved [ 0.381765] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.381768] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.381771] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.381775] system 00:0b: [mem 0xfefff000-0xfefff0ff] has been reserved [ 0.381778] system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.381781] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.381784] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.381788] system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.381791] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.381794] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.381798] system 00:0b: [mem 0xfefff000-0xfeffffff] could not be reserved [ 0.381801] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.381804] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.381808] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.381811] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.381836] pnp: PnP ACPI: found 12 devices [ 0.381838] ACPI: ACPI bus type pnp unregistered [ 0.388302] pci 0000:00:06.0: PCI bridge to [bus 01-01] [ 0.388305] pci 0000:00:06.0: bridge window [io disabled] [ 0.388309] pci 0000:00:06.0: bridge window [mem 0xf9000000-0xfcffffff] [ 0.388312] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.388316] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.388318] pci 0000:00:0a.0: bridge window [io disabled] [ 0.388321] pci 0000:00:0a.0: bridge window [mem disabled] [ 0.388323] pci 0000:00:0a.0: bridge window [mem pref disabled] [ 0.388327] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.388329] pci 0000:00:0b.0: bridge window [io disabled] [ 0.388332] pci 0000:00:0b.0: bridge window [mem disabled] [ 0.388335] pci 0000:00:0b.0: bridge window [mem pref disabled] [ 0.388338] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.388340] pci 0000:00:0c.0: bridge window [io disabled] [ 0.388343] pci 0000:00:0c.0: bridge window [mem disabled] [ 0.388346] pci 0000:00:0c.0: bridge window [mem pref disabled] [ 0.388349] pci 0000:00:0d.0: PCI bridge to [bus 05-05] [ 0.388351] pci 0000:00:0d.0: bridge window [io disabled] [ 0.388354] pci 0000:00:0d.0: bridge window [mem disabled] [ 0.388357] pci 0000:00:0d.0: bridge window [mem pref disabled] [ 0.388361] pci 0000:00:0e.0: PCI bridge to [bus 06-06] [ 0.388364] pci 0000:00:0e.0: bridge window [io 0x8000-0x9fff] [ 0.388367] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.388370] pci 0000:00:0e.0: bridge window [mem pref disabled] [ 0.388374] pci 0000:00:0f.0: PCI bridge to [bus 07-07] [ 0.388376] pci 0000:00:0f.0: bridge window [io 0x7000-0x7fff] [ 0.388380] pci 0000:00:0f.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.388383] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.388392] pci 0000:00:06.0: setting latency timer to 64 [ 0.388397] pci 0000:00:0a.0: setting latency timer to 64 [ 0.388402] pci 0000:00:0b.0: setting latency timer to 64 [ 0.388407] pci 0000:00:0c.0: setting latency timer to 64 [ 0.388411] pci 0000:00:0d.0: setting latency timer to 64 [ 0.388415] pci 0000:00:0e.0: setting latency timer to 64 [ 0.388420] pci 0000:00:0f.0: setting latency timer to 64 [ 0.388423] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.388426] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.388429] pci_bus 0000:00: resource 6 [mem 0xe0000000-0xf3ffffff] [ 0.388431] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff] [ 0.388434] pci_bus 0000:00: resource 8 [mem 0x120000000-0xfcffffffff] [ 0.388437] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfcffffff] [ 0.388439] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.388442] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff] [ 0.388444] pci_bus 0000:01: resource 6 [mem 0xe0000000-0xf3ffffff] [ 0.388447] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff] [ 0.388449] pci_bus 0000:01: resource 8 [mem 0x120000000-0xfcffffffff] [ 0.388452] pci_bus 0000:06: resource 0 [io 0x8000-0x9fff] [ 0.388455] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.388457] pci_bus 0000:07: resource 0 [io 0x7000-0x7fff] [ 0.388460] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.388462] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.388505] NET: Registered protocol family 2 [ 0.388697] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.390447] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.394928] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.395485] TCP: Hash tables configured (established 524288 bind 65536) [ 0.395488] TCP reno registered [ 0.395504] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.395550] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.395685] NET: Registered protocol family 1 [ 0.410088] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.410136] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.410183] pci 0000:00:05.2: Enabling HT MSI Mapping [ 0.410229] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.410280] pci 0000:00:06.1: Enabling HT MSI Mapping [ 0.410338] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.410402] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.410465] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.410533] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.410605] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.410680] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.410759] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.410842] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.410876] pci 0000:07:00.0: Boot video device [ 0.410879] PCI: CLS 32 bytes, default 64 [ 0.411958] PCI-DMA: Disabling AGP. [ 0.412061] PCI-DMA: aperture base @ d4000000 size 65536 KB [ 0.412063] PCI-DMA: using GART IOMMU. [ 0.412067] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.415738] audit: initializing netlink socket (disabled) [ 0.415751] type=2000 audit(1305399091.410:1): initialized [ 0.430801] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.432826] VFS: Disk quotas dquot_6.5.2 [ 0.432891] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.433616] fuse init (API version 7.16) [ 0.433719] msgmni has been set to 7881 [ 0.433979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.434009] io scheduler noop registered [ 0.434011] io scheduler deadline registered [ 0.434053] io scheduler cfq registered (default) [ 0.434215] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.434244] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X [ 0.434313] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.434333] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 0.434399] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.434418] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 0.434480] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.434499] pcieport 0000:00:0d.0: irq 43 for MSI/MSI-X [ 0.434565] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.434584] pcieport 0000:00:0e.0: irq 44 for MSI/MSI-X [ 0.434648] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.434667] pcieport 0000:00:0f.0: irq 45 for MSI/MSI-X [ 0.434739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.434764] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.434930] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.434936] ACPI: Power Button [PWRB] [ 0.435005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.435008] ACPI: Power Button [PWRF] [ 0.435071] ACPI: Fan [FAN] (on) [ 0.435333] ACPI: acpi_idle registered with cpuidle [ 0.438197] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.438200] ACPI: Thermal Zone [THRM] (40 C) [ 0.438271] ERST: Table is not found! [ 0.438367] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.458877] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.705891] Freeing initrd memory: 18692k freed [ 0.830604] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.830964] Linux agpgart interface v0.103 [ 0.832313] brd: module loaded [ 0.832959] loop: module loaded [ 0.833077] i2c-core: driver [adp5520] using legacy suspend method [ 0.833080] i2c-core: driver [adp5520] using legacy resume method [ 0.833356] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.833653] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.833671] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.833692] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.833700] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.833936] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.833947] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.833965] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.833972] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.834167] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.834178] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.834195] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.834202] pata_acpi 0000:00:05.2: PCI INT C disabled [ 0.834258] pata_acpi 0000:06:00.1: enabling device (0000 -> 0001) [ 0.834408] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 0.834418] pata_acpi 0000:06:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 0.834439] pata_acpi 0000:06:00.1: setting latency timer to 64 [ 0.834449] pata_acpi 0000:06:00.1: PCI INT B disabled [ 0.835049] Fixed MDIO Bus: probed [ 0.835087] PPP generic driver version 2.4.2 [ 0.835158] tun: Universal TUN/TAP device driver, 1.6 [ 0.835160] tun: (C) 1999-2004 Max Krasnyansky [ 0.835268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.835460] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.835470] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.835497] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.835500] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.835578] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.870058] ehci_hcd 0000:00:02.1: debug port 1 [ 0.870065] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.870088] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000 [ 0.890017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.890155] hub 1-0:1.0: USB hub found [ 0.890160] hub 1-0:1.0: 10 ports detected [ 0.890273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.890485] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.890490] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.890506] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.890508] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.890561] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.890616] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.952131] hub 2-0:1.0: USB hub found [ 0.952138] hub 2-0:1.0: 10 ports detected [ 0.952244] uhci_hcd: USB Universal Host Controller Interface driver [ 0.952370] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.952764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.952772] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.952852] mousedev: PS/2 mouse device common for all mice [ 0.952975] rtc_cmos 00:05: RTC can wake from S4 [ 0.980067] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.980102] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.980214] device-mapper: uevent: version 1.0.3 [ 0.980299] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.980377] device-mapper: multipath: version 1.2.0 loaded [ 0.980381] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.980546] cpuidle: using governor ladder [ 0.980549] cpuidle: using governor menu [ 0.980833] TCP cubic registered [ 0.980967] NET: Registered protocol family 10 [ 0.981609] NET: Registered protocol family 17 [ 0.981629] Registering the dns_resolver key type [ 0.981656] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00) [ 0.981701] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xe [ 0.981704] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x10 [ 0.981706] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10 [ 0.981708] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 0.981869] PM: Hibernation image not present or could not be loaded. [ 0.981881] registered taskstats version 1 [ 0.982219] Magic number: 11:294:898 [ 0.982329] rtc_cmos 00:05: setting system clock to 2011-05-14 18:51:32 UTC (1305399092) [ 0.982333] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.982334] EDD information not available. [ 0.984254] Freeing unused kernel memory: 956k freed [ 0.984655] Write protecting the kernel read-only data: 10240k [ 0.985477] Freeing unused kernel memory: 184k freed [ 0.990926] Freeing unused kernel memory: 1444k freed [ 1.018056] <30>udev[114]: starting version 167 [ 1.125586] sata_nv 0000:00:05.0: version 3.5 [ 1.125602] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.125606] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.125665] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.128271] scsi0 : sata_nv [ 1.130684] scsi1 : sata_nv [ 1.130852] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 1.130855] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 1.133425] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.133430] sata_nv 0000:00:05.1: Using SWNCQ mode [ 1.133494] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1.136374] scsi2 : sata_nv [ 1.138509] pata_jmicron 0000:06:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 1.138551] pata_jmicron 0000:06:00.1: setting latency timer to 64 [ 1.138908] scsi3 : sata_nv [ 1.139054] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 [ 1.139058] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 [ 1.139242] scsi4 : pata_jmicron [ 1.139337] scsi5 : pata_jmicron [ 1.139386] ata5: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16 [ 1.139389] ata6: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16 [ 1.139578] ahci 0000:06:00.0: version 3.0 [ 1.139774] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 1.139779] ahci 0000:06:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 1.147095] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.147100] sata_nv 0000:00:05.2: Using SWNCQ mode [ 1.147171] sata_nv 0000:00:05.2: setting latency timer to 64 [ 1.150138] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.150144] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.150150] ahci 0000:06:00.0: setting latency timer to 64 [ 1.152342] scsi6 : sata_nv [ 1.152472] scsi7 : ahci [ 1.153084] scsi8 : sata_nv [ 1.153230] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 [ 1.153234] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 [ 1.153285] scsi9 : ahci [ 1.153353] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 16 [ 1.153358] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 16 [ 1.153416] pata_amd 0000:00:04.0: version 0.4.1 [ 1.153462] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.156892] scsi10 : pata_amd [ 1.157416] scsi11 : pata_amd [ 1.157891] ata11: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.157894] ata12: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.161608] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.161818] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.161825] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 1.161830] forcedeth 0000:00:08.0: setting latency timer to 64 [ 1.340260] ata11.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL05, max UDMA/66 [ 1.340270] ata11: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 1.340274] ata11.00: limited to UDMA/33 due to 40-wire cable [ 1.380188] ata11.00: configured for UDMA/33 [ 1.480024] ata7: SATA link down (SStatus 0 SControl 300) [ 1.500034] ata9: SATA link down (SStatus 0 SControl 300) [ 1.510032] ata10: SATA link down (SStatus 0 SControl 300) [ 1.610017] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 1.620028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.620030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.640220] ata3.00: ATA-8: OCZ-VERTEX, 1.4, max UDMA/133 [ 1.640223] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.680176] ata3.00: configured for UDMA/133 [ 1.683703] ata1.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133 [ 1.683706] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.685557] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:90:39:48 [ 1.685562] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.685841] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 [ 1.685847] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21 [ 1.685852] forcedeth 0000:00:09.0: setting latency timer to 64 [ 1.767003] ata1.00: configured for UDMA/133 [ 1.767148] scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 [ 1.767343] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.767479] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.767531] sd 0:0:0:0: [sda] Write Protect is off [ 1.767535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.767558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.825316] sda: sda1 sda2 sda3 [ 1.825641] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.895114] usbcore: registered new interface driver usbhid [ 1.895117] usbhid: USB HID core driver [ 2.180023] usb 2-4: new full speed USB device using ohci_hcd and address 3 [ 2.210765] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:17:31:90:29:b4 [ 2.210769] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 2.250036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.320844] ata2.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133 [ 2.320847] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.407099] hub 2-4:1.0: USB hub found [ 2.410032] hub 2-4:1.0: 4 ports detected [ 2.412465] ata2.00: configured for UDMA/133 [ 2.412608] scsi 1:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 [ 2.412758] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.412788] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.412811] sd 1:0:0:0: [sdb] Write Protect is off [ 2.412814] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.412837] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.412935] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX 1.4 PQ: 0 ANSI: 5 [ 2.413060] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.413148] sd 2:0:0:0: [sdc] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 2.413217] sd 2:0:0:0: [sdc] Write Protect is off [ 2.413220] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.413242] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.413647] sdc: sdc1 [ 2.413864] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.452175] sdb: sdb1 [ 2.452416] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.722035] usb 2-4.1: new low speed USB device using ohci_hcd and address 4 [ 2.740019] ata4: SATA link down (SStatus 0 SControl 300) [ 2.910107] input: USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input2 [ 2.910212] generic-usb 0003:0B39:0D04.0003: input,hidraw0: USB HID v1.10 Keyboard [USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5] on usb-0000:00:02.0-4.1/input0 [ 2.918629] input: USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.1/input/input3 [ 2.918783] generic-usb 0003:0B39:0D04.0004: input,hidraw1: USB HID v1.10 Mouse [USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5] on usb-0000:00:02.0-4.1/input1 [ 3.002034] usb 2-4.2: new full speed USB device using ohci_hcd and address 5 [ 3.114031] usb 2-4.2: not running at top speed; connect to a high speed hub [ 3.141557] usbcore: registered new interface driver uas [ 3.212035] usb 2-4.3: new full speed USB device using ohci_hcd and address 6 [ 3.240022] ata8: SATA link down (SStatus 0 SControl 300) [ 3.241137] scsi 10:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1P KL05 PQ: 0 ANSI: 5 [ 3.243843] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.243847] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.244000] sr 10:0:0:0: Attached scsi CD-ROM sr0 [ 3.244081] sr 10:0:0:0: Attached scsi generic sg3 type 5 [ 3.244171] ata12: port disabled. ignoring. [ 3.253836] Initializing USB Mass Storage driver... [ 3.254311] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 3.254334] firewire_ohci 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 3.255694] scsi12 : usb-storage 2-4.2:1.3 [ 3.255985] usbcore: registered new interface driver usb-storage [ 3.255988] USB Mass Storage support registered. [ 3.280289] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4 [ 3.280435] logitech 0003:046D:C517.0001: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-3/input0 [ 3.289057] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 3.290069] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input5 [ 3.290257] logitech 0003:046D:C517.0002: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3/input1 [ 3.310114] firewire_ohci: Added fw-ohci device 0000:01:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.442039] usb 2-4.4: new full speed USB device using ohci_hcd and address 7 [ 3.576406] scsi13 : usb-storage 2-4.4:1.0 [ 3.604605] EXT4-fs (sdc1): INFO: recovery required on readonly filesystem [ 3.604609] EXT4-fs (sdc1): write access will be enabled during recovery [ 3.810151] firewire_core: created device fw0: GUID 0011d80000d040bf, S400 [ 4.045701] EXT4-fs (sdc1): orphan cleanup on readonly fs [ 4.045711] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 664349 [ 4.045805] EXT4-fs (sdc1): 1 orphan inode deleted [ 4.045808] EXT4-fs (sdc1): recovery complete [ 4.144298] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 4.259069] scsi 12:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5 [ 4.259721] sd 12:0:0:0: Attached scsi generic sg4 type 0 [ 4.281051] sd 12:0:0:0: [sdd] Attached SCSI removable disk [ 4.579060] scsi 13:0:0:0: Direct-Access SanDisk ImageMate 6 in 1 0.0> PQ: 0 ANSI: 0 [ 4.586052] scsi 13:0:0:1: Direct-Access SanDisk ImageMate 6 in 1 0.0> PQ: 0 ANSI: 0 [ 4.593052] scsi 13:0:0:2: Direct-Access SanDisk ImageMate 6 in 1 0.0> PQ: 0 ANSI: 0 [ 4.600050] scsi 13:0:0:3: Direct-Access SanDisk ImageMate 6 in 1 0.0> PQ: 0 ANSI: 0 [ 4.600588] sd 13:0:0:0: Attached scsi generic sg5 type 0 [ 4.600736] sd 13:0:0:1: Attached scsi generic sg6 type 0 [ 4.600875] sd 13:0:0:2: Attached scsi generic sg7 type 0 [ 4.601026] sd 13:0:0:3: Attached scsi generic sg8 type 0 [ 4.677047] sd 13:0:0:0: [sde] Attached SCSI removable disk [ 4.688044] sd 13:0:0:1: [sdf] Attached SCSI removable disk [ 4.721040] sd 13:0:0:2: [sdg] Attached SCSI removable disk [ 4.732040] sd 13:0:0:3: [sdh] Attached SCSI removable disk [ 4.837190] <30>udev[466]: starting version 167 [ 4.846452] Adding 3148736k swap on /dev/sda3. Priority:-1 extents:1 across:3148736k [ 4.896307] lp: driver loaded but no devices found [ 4.902502] it87: Found IT8716F chip at 0x290, revision 0 [ 4.902559] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296] [ 4.902562] ACPI: This conflict may cause random problems and system instability [ 4.902564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.965877] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [ 5.032067] asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 5.064386] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5.068706] SGI XFS Quota Management subsystem [ 5.071764] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 5.071770] ACPI: resource nForce2_smbus [io 0x1c40-0x1c7f] conflicts with ACPI region SM00 [io 0x1c40-0x1c45] [ 5.071772] ACPI: This conflict may cause random problems and system instability [ 5.071774] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.071809] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 [ 5.073591] NV_TCO: NV TCO WatchDog Timer Driver v0.01 [ 5.073692] NV_TCO: Watchdog reboot not detected. [ 5.073777] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0) [ 5.094511] XFS mounting filesystem sda2 [ 5.146573] type=1400 audit(1305399096.650:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=625 comm="apparmor_parser" [ 5.147145] type=1400 audit(1305399096.650:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=625 comm="apparmor_parser" [ 5.147422] type=1400 audit(1305399096.650:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=625 comm="apparmor_parser" [ 5.173297] parport_pc 00:09: reported by Plug and Play ACPI [ 5.173325] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 5.187548] Starting XFS recovery on filesystem: sda2 (logdev: internal) [ 5.230324] Linux video capture interface: v2.00 [ 5.231403] MCE: In-kernel MCE decoding enabled. [ 5.323243] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.414066] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 5.418821] lp0: using parport0 (interrupt-driven). [ 5.420483] IR NEC protocol handler initialized [ 5.427913] IR RC5(x) protocol handler initialized [ 5.436127] nvidia: module license 'NVIDIA' taints kernel. [ 5.436131] Disabling lock debugging due to kernel taint [ 5.454045] EDAC amd64_edac: v3.3.0 [ 5.463310] EDAC amd64: DRAM ECC disabled. [ 5.463319] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 5.463320] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 5.463321] (Note that use of the override may cause unknown side effects.) [ 5.463474] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11 [ 5.471133] usbcore: registered new interface driver usblp [ 5.540081] IR RC6 protocol handler initialized [ 5.900565] IR JVC protocol handler initialized [ 5.900870] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded [ 5.902766] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 5.906838] cx88[0]: subsystem: 0070:2801, board: Hauppauge WinTV 28xxx (Roslyn) models [card=24,autodetected], frontend(s): 0 [ 5.906843] cx88[0]: TV tuner type -1, Radio tuner type -1 [ 5.980278] IR Sony protocol handler initialized [ 5.980964] ppdev: user-space parallel port driver [ 5.999588] lirc_dev: IR Remote Control driver registered, major 249 [ 6.002899] IR LIRC bridge handler initialized [ 6.042856] i2c-core: driver [tuner] using legacy suspend method [ 6.042860] i2c-core: driver [tuner] using legacy resume method [ 6.060558] tuner 2-0061: chip found @ 0xc2 (cx88[0]) [ 6.097083] tveeprom 2-0050: Hauppauge model 28552, rev B133, serial# 7166745 [ 6.097086] tveeprom 2-0050: tuner model is Temic 4039FR5 (idx 33, type 21) [ 6.097089] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 6.097092] tveeprom 2-0050: audio processor is CX880 (idx 30) [ 6.097094] tveeprom 2-0050: has radio [ 6.097096] cx88[0]: hauppauge eeprom: model=28552 [ 6.115336] cx2388x alsa driver version 0.0.8 loaded [ 6.165083] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 6.165090] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 6.165094] hda_intel: msi for device 1043:81f6 set to 0 [ 6.165127] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 6.170156] tuner-simple 2-0061: creating new instance [ 6.170161] tuner-simple 2-0061: type set to 21 (Temic NTSC (4039 FR5)) [ 6.173045] cx88[0]/2: cx2388x 8802 Driver Manager [ 6.173230] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 6.173248] cx88-mpeg driver manager 0000:01:07.2: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 6.173256] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 17, latency: 32, mmio: 0xfb000000 [ 6.176664] cx8800 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 6.176673] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 17, latency: 32, mmio: 0xfa000000 [ 6.176877] cx88[0]/0: registered device video0 [v4l2] [ 6.176978] cx88[0]/0: registered device vbi0 [ 6.177075] cx88[0]/0: registered device radio0 [ 6.192258] cx88_audio 0000:01:07.1: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 6.192286] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 6.236275] cx2388x blackbird driver version 0.0.8 loaded [ 6.236279] cx88/2: registering cx8802 driver, type: blackbird access: shared [ 6.236283] cx88[0]/2: subsystem: 0070:2801, board: Hauppauge WinTV 28xxx (Roslyn) models [card=24] [ 6.236287] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) [ 6.236507] cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted [ 8.550886] cx88[0]/2-bb: Firmware upload successful. [ 8.551134] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 8.551142] nvidia 0000:07:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 8.551150] nvidia 0000:07:00.0: setting latency timer to 64 [ 8.551155] vgaarb: device changed decodes: PCI:0000:07:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.551406] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011 [ 8.571626] cx88[0]/2-bb: Firmware version is 0x02060039 [ 8.578108] cx88[0]/2: registered device video1 [mpeg] [ 11.470272] Ending XFS recovery on filesystem: sda2 (logdev: internal) [ 11.507779] XFS mounting filesystem sdb1 [ 11.624396] Ending clean XFS mount for filesystem: sdb1 [ 11.714168] type=1400 audit(1305399103.220:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1033 comm="apparmor_parser" [ 11.714560] type=1400 audit(1305399103.220:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1033 comm="apparmor_parser" [ 11.718294] type=1400 audit(1305399103.220:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1033 comm="apparmor_parser" [ 11.723337] type=1400 audit(1305399103.230:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1037 comm="apparmor_parser" [ 11.728251] type=1400 audit(1305399103.230:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1043 comm="apparmor_parser" [ 11.728513] type=1400 audit(1305399103.230:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1043 comm="apparmor_parser" [ 11.732318] type=1400 audit(1305399103.240:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1037 comm="apparmor_parser" [ 11.735534] type=1400 audit(1305399103.240:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1044 comm="apparmor_parser" [ 11.841054] forcedeth 0000:00:08.0: irq 46 for MSI/MSI-X [ 11.847717] forcedeth 0000:00:09.0: irq 47 for MSI/MSI-X [ 11.847910] forcedeth 0000:00:09.0: eth1: no link during initialization [ 11.848985] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.683734] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0 [ 13.457831] RPC: Registered udp transport module. [ 13.457838] RPC: Registered tcp transport module. [ 13.457842] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.471825] FS-Cache: Loaded [ 13.494801] FS-Cache: Netfs 'nfs' registered for caching [ 13.595587] svc: failed to register lockdv1 RPC service (errno 97). [ 22.700012] eth0: no IPv6 routers present [ 184.941335] vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90008980000, using 6912k, total 6912k [ 184.941353] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 184.941362] vesafb: scrolling: redraw [ 184.941371] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 184.946120] Console: switching to colour frame buffer device 210x65 [ 184.975017] fb0: VESA VGA frame buffer device [ 184.981390] type=1400 audit(1305399275.268:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1461 comm="apparmor_parser" [ 184.982767] type=1400 audit(1305399275.268:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1461 comm="apparmor_parser" [ 185.326433] ioremap error for 0xdfee3000-0xdfee4000, requested 0x10, got 0x0 [ 186.618241] usb 2-4.2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 197.153799] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0 [ 240.430086] INFO: task v4l_id:965 blocked for more than 120 seconds. [ 240.430094] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.430100] v4l_id D 0000000000000001 0 965 1 0x00000000 [ 240.430110] ffff880113e4fb28 0000000000000086 ffff880113e4ffd8 ffff880113e4e000 [ 240.430119] 0000000000013d00 ffff880111939a98 ffff880113e4ffd8 0000000000013d00 [ 240.430128] ffff8801128296e0 ffff8801119396e0 ffffffff81060a27 ffff880113800870 [ 240.430136] Call Trace: [ 240.430151] [] ? mutex_spin_on_owner+0x97/0xd0 [ 240.430162] [] __mutex_lock_slowpath+0xf7/0x180 [ 240.430170] [] mutex_lock+0x2b/0x50 [ 240.430190] [] cx8802_request_acquire+0x5f/0xf0 [cx8802] [ 240.430200] [] mpeg_open+0x78/0x270 [cx88_blackbird] [ 240.430225] [] v4l2_open+0x101/0x130 [videodev] [ 240.430236] [] chrdev_open+0xda/0x1f0 [ 240.430244] [] ? chrdev_open+0x0/0x1f0 [ 240.430251] [] __dentry_open+0xce/0x2f0 [ 240.430258] [] ? generic_permission+0x23/0xc0 [ 240.430266] [] nameidata_to_filp+0x71/0x80 [ 240.430274] [] finish_open+0xc8/0x1b0 [ 240.430280] [] ? do_path_lookup+0x87/0x160 [ 240.430288] [] do_filp_open+0x2c8/0x7c0 [ 240.430295] [] ? handle_mm_fault+0x16d/0x250 [ 240.430306] [] ? __strncpy_from_user+0x27/0x60 [ 240.430314] [] ? alloc_fd+0xf7/0x150 [ 240.430321] [] do_sys_open+0x6a/0x150 [ 240.430328] [] sys_open+0x20/0x30 [ 240.430335] [] system_call_fastpath+0x16/0x1b